Made in USA
Made in USA

Products, Inc.
Since 1964

Grips * Handle Grips * Hand Grips * Foam Grips * Custom Grips * Cushion Grips * Ergonomic Grips

Quality - Comfort - Durability

FOAM is a unique PVC vinyl closed-cell foam of unequaled durability and comfort. Non-absorbant; dirt and oils can be easily washed away. EEZER foam is unaffected by most solvents and chemicals, is highly UV resistant and is available in anti-static compound.

FOAM grips are manufactured through a patented proprietary process using our unique EEZER foam. As a result, EEZER grips are unmatched for quality, durability and molding flexibility.

  FOAM's velvet smooth surface is non-slip under adverse conditions and improves with use. EEZER foam is a high density shock absorber and insulator with unequaled abrasion resistance.

FOAM is custom manufactured to your specifications. Stock mandrel sizes 5/32" to 2.7" diameter and lengths to 21". Custom tooling at a fraction of injection molding tooling cost. Stock grip sizes available for small volume prototype and production runs available for immediate delivery.

What do our customers think about Eezer Grips?

Eezer Products is pleased to be able to offer a selection of Eezer Foam Handle Grips in stock sizes for immediate shipment. This selection is designed to be used for replacement grips on hand tools, shop tools, hand trucks, brooms, shovels, prototypes, and pre-production sample runs. Installation instructions will be included with your order.

For custom sizes or quantity pricing in excess of 1,000 pieces, please contact the factory at (559) 255-4140.


Microsoft Word Document download


EEZER Foam handle grips are designed to be installed with a minimum of time, effort and materials resulting in a snug, non-slip fit. In most cases no adhesive is required. These instructions will aid you in developing a quick and efficient installation technique.

1. Many installations require only that the grip be pushed onto the handle bar. Remember that pushing from the closed end of the grip enlarges the diameter and pulling the grip decreases the diameter. Pushing the grip into place is the proper procedure.

2. For more difficult installations of grips of longer length, greater than usual stretch or traveling a distance over a bar or around corners to the area where needed, a couple of techniques may be of help to you.

A. Compressed air directed into the open end of the grip as it is pushed into place often works very well and is quite fast in production line situations.

B. If a lubricant is required, RUBBING ALCOHOL, 30% water/70% rubbing alcohol, sprayed as a mist and thoroughly coating the inside of the grip is the best material to use. The installer should wear a cotton glove to provide good friction between his/her hand and the grip. Allow 24-48 hours for the alcohol to dissipate and a tight installation. Some long grips may take up to 1 week to dry.

C. Another lubricant we have found to work very well is P80 Rubber Lubricant available from International Products (609) 386-8770.

D. For the toughest installations requiring a lot of stretch and positioning travel, heat the grip to a temperature of about 150-175 degrees F. This can be done in a clothes dryer at normal operating temperatures in about 5 minutes. An oven or heat lamp might also be used. Now use the rubbing alcohol as described above.

A couple of suggestions: Do not use soapy water as a lubricant. The water will not evaporate and you will end up with a loose grip. Compatible adhesives: Hair Spray, Cyanoacrylate, Tesa Tape #4965. If you have any questions please contact the factory.

Click Print, or download printable Instructions

(.pdf file)

Satisfaction Guaranteed

Products, Inc. guarantees these products to be free of defects in original workmanship and materials. If any defect develops, will replace the product at no charge, provided the defect is not the result of mishandling or abuse on the part of the user and that the defective product is returned to the factory with transportation charges prepaid.

Prices and availability subject to change without notice.

Made With Pride in the USA!
4734 E. Home Avenue
Fresno, CA 93703
Telephone: 559-255-4140 or 800-237-0683
Fax: 559-255-4907
Send E-Mail

Call or e-mail for a free sample or a quote on custom made foam grips!

Main Page
Sanding & Finishing Products
More About Products

LE FastCounter